Tag Archives: FEZ

NETMF Get/Set Real Time Clock (RTC)

Just a short reminder post on how to get and set RTC.  The RTC is powered by VBatt pin and keeps the RTC ticking with the time after you set it once.  After you set it, then just read the … Continue reading

Posted in .Net Micro Framework, C# | Tagged , , , | 1 Comment

FEZ firmware update helper

Just wanted a reminder post when I have to update FEZ with new firmware. Update Fez Firmware1) Hold LDR button then plug in USB.  New comm port should appear in devices (i.e. comm13)2) Open TeraTerm3) Erase current with E4) Load … Continue reading

Posted in .Net Micro Framework, C#, FEZ | Tagged ,

NETMF Servo classes (PWM and Software versions)

Just posting some servo classes.  One for hardware PWM control and one for software PWM using OutputCompare. Never know when you may need. using System; using GHIElectronics.NETMF.FEZ; using GHIElectronics.NETMF.Hardware; namespace MicroFezRobot { public class ServoHardPWM : IServo { readonly PWM … Continue reading

Posted in .Net Micro Framework, C#, FEZ, Motors, Servo | Tagged , , ,

NETMF Joystick Shield Driver

Adding a joystick to your NETMF device is easy with the Sparkfun joystick shield and the following code. /* Copyright 2011 William Stacey Licensed under the Apache License, Version 2.0 (the “License”); you may not use this file except in … Continue reading

Posted in .Net Micro Framework, C#, FEZ, Robotics | Tagged , , , , ,

Simple servo control from FEZ

If you just need the easiest possible way to hook up a servo to FEZ, it does not get easier then this.  No breadboards, mosfets, or resistors.  Just hook the servo wires into the fez and control.  If your servo … Continue reading

Posted in .Net Micro Framework, C#, FEZ, Robotics, Servo | Tagged , , , ,

Add some sound to your FEZ

So a Piezo speaker is not loud enough for your project, but you don’t want to add an amplifier and external power supply?  How about going middle of the road.  Use your raw 3.3v supply and add the Pololu 2W … Continue reading

Posted in .Net Micro Framework, C#, FEZ, Sound | Tagged , , ,

Roll Your Own Servo Tester

So you want to test the range of your servos.  Who needs a servo tester/driver?  If you have a MCU, a POT and some wire, you can make one. Servo Tester Recipe: Fez MCU (code written for NETMF) POT or … Continue reading

Posted in .Net Micro Framework, C#, FEZ, Motors, Servo | Tagged , , , | 4 Comments